Drilldown: CapGrads
Use the filters below to narrow your results.
In my capstone I will talk about the different mediums that I explored during my time at TSAS. I also included various figures that inspired me along the way. (1) ·
My original capstone project was to create an irrigation system for the plants in the Commons on top of the bookshelf. I designed the dropper, the base, end caps, the hose splitter, and connectors. I have my irrigation system put together on a metal shelf that I bought to finish the project. My irri (1)
I had always planned to involve my art in my capstone. (1) ·
My capstone project was an indoor irrigation system for the plants on top of the book shelves in the Commons. The irrigation system was to be automated and would only need for the reservoir to be filled every so often; everything else would be taken care of by the system. The system would run off of (1)
Although capstone did take an unexpected turn, it wasn't difficult to adjust to the new changes. (1) ·
It felt like I had to completely change my project. I had to downsize everything and almost start over. I lost the capability to set up the system how I had originally designed it. In order for the new system to work I had to completely change the way that the water was going to flow to the plants. (1)
I did the best that I could with the time that I had. I made a system that worked and that watered my plants. It is not nearly as fancy or sophisticated as I had originally planned on it being, but I still made it happen and I am proud of it. It was a struggle and a half to completely spin and start (1) ·
I reflected over the numerous art mediums that I wouldn't have tried if I hadn't gone to TSAS. (1)
Showing below up to 2 results in range #1 to #2.
View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)


