Drilldown: CapGrads
Use the filters below to narrow your results.
My original capstone project was to create an irrigation system for the plants in the Commons on top of the bookshelf. I designed the dropper, the base, end caps, the hose splitter, and connectors. I have my irrigation system put together on a metal shelf that I bought to finish the project. My irri (1) ·
My project is about canine health and how I helped my dogs with common sicknesses or injuries that they could have gotten from walks or going to the dog park. (1)
None (1) ·
My capstone project was an indoor irrigation system for the plants on top of the book shelves in the Commons. The irrigation system was to be automated and would only need for the reservoir to be filled every so often; everything else would be taken care of by the system. The system would run off of (1)
It felt like I had to completely change my project. I had to downsize everything and almost start over. I lost the capability to set up the system how I had originally designed it. In order for the new system to work I had to completely change the way that the water was going to flow to the plants. (1) ·
The project name was going to be Animal Health including other animals as well but I couldn't include them unfortunately due to having to move. (1)
I did the best that I could with the time that I had. I made a system that worked and that watered my plants. It is not nearly as fancy or sophisticated as I had originally planned on it being, but I still made it happen and I am proud of it. It was a struggle and a half to completely spin and start (1) ·
I learned that not all dog breeds are the same with sicknesses or even injuries, I also learned how to sanitize properly and safely for animals. The takeaways were having to realize that not all you try to save might make it, but at least you tried and gave them hope at the end. (1)
Showing below up to 2 results in range #1 to #2.
View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)


