Difference between revisions of "OctoPrint"
From TSAS Library
JStallings (talk | contribs) |
JStallings (talk | contribs) |
||
| Line 1: | Line 1: | ||
{{note|This page is for the use of OctoPrint; for installation and technical information, see [[How to: Install Octoprint]].}} | {{note|This page is for the use of OctoPrint; for installation and technical information, see [[How to: Install Octoprint]].}} | ||
# OctoPrint is located [http://192.168.25.126/ here]. We use it to control the printer remotely | # OctoPrint is located [http://192.168.25.126/ here]. We use it to control the printer remotely. If you are using a personal computer with Bonjour service installed, connect to the school's wifi and go to [octopi.local] | ||
# Login with your credentials. Ask Stallings | # Login with your credentials. Ask Stallings for yours | ||
# Open the folder on your computer containing the .gcode file you created with Cura | # Open the folder on your computer containing the .gcode file you created with Cura | ||
# Drag the file into the left of the OctoPrint screen | # Drag the file into the left of the OctoPrint screen | ||
# You should see the file appear in the Files list on the left side of the screen. | [[File:GcodeUpload.gif|frameless|right|Uploading .gcode file to OctoPrint for remote printing]] | ||
# Click your file to load it. If there are errors, do not print the file | # You should see the file appear in the Files list on the left side of the screen. | ||
# Click your file to load it. If there are errors, do not print the file! | |||
# If there are no errors, click the Blue print button to begin printing | # If there are no errors, click the Blue print button to begin printing | ||
# Head to the printer and watch the first few layers for errors | |||
# Take a picture of your creation and upload it to the [[gallery|3D Print Gallery]] | |||
For further inspiration, check out the [[tools|Creating a Model to Print]] and [[resources|3D Model Sources]] pages. If you come across something not listed, please add it! | |||
== | {| class="wikitable" style="margin:auto;" | ||
!3D Print Training Series | |||
|- | |||
|Previously: Using [[OctoPrint]] | |||
|} | |||
[[Category:Maker Space]] | [[Category:Maker Space]] | ||
[[Category:3D Printing]] | [[Category:3D Printing]] | ||
Revision as of 19:36, 25 April 2017
This page is for the use of OctoPrint; for installation and technical information, see How to: Install Octoprint.
- OctoPrint is located here. We use it to control the printer remotely. If you are using a personal computer with Bonjour service installed, connect to the school's wifi and go to [octopi.local]
- Login with your credentials. Ask Stallings for yours
- Open the folder on your computer containing the .gcode file you created with Cura
- Drag the file into the left of the OctoPrint screen
- You should see the file appear in the Files list on the left side of the screen.
- Click your file to load it. If there are errors, do not print the file!
- If there are no errors, click the Blue print button to begin printing
- Head to the printer and watch the first few layers for errors
- Take a picture of your creation and upload it to the 3D Print Gallery
For further inspiration, check out the Creating a Model to Print and 3D Model Sources pages. If you come across something not listed, please add it!
| 3D Print Training Series |
|---|
| Previously: Using OctoPrint |